Fuel Filters for Nitro RC Engines

by Joe
(Bear De)

Hi Matt

I have a question that you might be able to help me with. I have a Tower Pro .46 glow engine. I'm thinking of putting a fuel filter between the fuel tank and the high speed needle valve.

Is this the right place to put this and is it necessary to do this? Will it change the fuel flow?

Comments for
Fuel Filters for Nitro RC Engines

Average Rating

Click here to add your own comments

Apr 15, 2009
Rating

probably not necessary
by: Matt

Hi Joe,

I've never used such a filter. I just rely on the filter on the fill tubing that goes into the gallon of fuel that I bring to the field. As long as the fuel going into the tank is clean, you should be OK.

They do make a filters that go between the tank and engine. If you decide to use one I don't foresee any problems with flow since this is what it's made for. Of course, it will restrict flow if debris builds up.

Sullivan "Crap Trap" Filter

Hanger 9 Fuel Filter

Hope this helps.

Happy flying!

Matt

Apr 15, 2009
Rating

fuel filter
by: joe

thanks for the help matt. i guess it's up to the person to use the filter. i was thinking the same thing. when i fill the tank their is a filter at the end of the filler hose.

i want to thank you for your help

joe bear de

Apr 16, 2009
Rating

fuel filter
by: Anonymous

Never a problem. Just keep it cleen assuming your fuel is dirty. Clean fuel? No filter needed.

May 04, 2009
Rating

2 cycle
by: joe

mat i have a question about adding 2 cycle oil to my glow fuel 2 cycle oil for weed wacker not the fuel but just the oil itself will it hurt the engine or is their a specific oil to add to glow fuel? i,m using 5% glow fuel now just want to add a little more oil to the glow fuel i have 4 gallons and i can,t send back

May 04, 2009
Rating

Don't use the weed wacker oil
by: Matt

Hi Joe,

I wouldn't recommend using your weed wacker oil. You need to use 100% castor oil, which weed wacker oil is not.

Your local hobby story probably has some.

If not, you can order some online:

Sig Castor

Klotz from Tower Hobbies

Hope this helps,

Matt