crrc pro 50cc engine on hanger 9 260

question

i have crrc pro 50cc engine on hanger 9 260 want to hook up throttle linkage. the return spring puts pressure on the servo.

i unhooked the spring, but the servo arm will not pull the throttle shaft back to idle. need h

elp thanks.

Comments for
crrc pro 50cc engine on hanger 9 260

Click here to add your own comments

crrc pro 50cc engine hanger 9 260 owner
by: Anonymous

i adjusted the enpoints on the transmitter and the throttle worked fine. thanks matt

what's it doing?
by: Matt

If your servo not strong enough to pull the linkage? Or is the servo reaching its end point before the throttle is closed?

Does the throttle linkage turn easy by hand? Or is it bound up?

If it moves freely by hand then maybe you need to adjust the arm on the servo so it will close all the way?

Or maybe you could adjust the end points on the transmitter?